| 
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE2 - 2121372 Counter Heater and energizing timeaccumulating counter Dis-play/0 clearingALL 0<8 digits>M Counts up the heatercontrol time accumu-lated (when power ofthe equipment is ON)but does not count atthe Sleep Mode. Whenthe counter value of thefuser roller is cleared,this counter value isalso cleared in sync atthe PM support mode.11376 Counter Toner cartridge drivecounterALL 0<8 digits>M Counts the rotationnumber of the tonercartridge.11378 Counter Counter for period of timefuser unit is at ready tem-peratureALL 0<8 digits>M Counts up the heatercontrol time accumu-lated (when the equip-ment is at ready status).When the counter valueof the fuser roller isreset, this counter isalso reset in sync at thePM support mode.11380 Counter Counter for period of timefuser unit is at printing tem-peratureALL 0<8 digits>M Counts up the heatercontrol time accumu-lated (during printing).When the counter valueof the fuser roller isreset, this counter isalso reset in sync at thePM support mode.11382 Counter Counter for period of timefuser unit is at energy sav-ing temperature/CounterresetALL 0<8 digits>M Counts up the heatercontrol time accumu-lated (when the equip-ment is in the EnergySaving Mode).When the counter valueof the fuser roller isreset, this counter isalso reset in sync at thePM support mode.11385 Imageprocess-ingNumber of output pages(Thick paper 1)ALL 0<8 digits>M Counts up when theregistration sensor isON. When the countervalue of the fuser rolleris cleared, this countervalue is also cleared insync at the PM supportmode.11386 Imageprocess-ingNumber of output pages(Thick paper 2)ALL 0<8 digits>M Counts up when theregistration sensor isON. When the countervalue of the fuser rolleris cleared, this countervalue is also cleared insync at PM supportmode.1Setting mode (08) Code Classifi-cation Items Func-tionDefaultablevalue>RAM Contents Proce-dure07/11 |
