March 2000 © TOSHIBA TEC 4-11 DP120F/DP125F Function SettingsOFFTo deactivate the Super Power Saver mode.When Automatic is selected, the screen below is displayed. Enter the desired TIMEperiod (in minutes) and press the [ENTER] key.Set the time period from 1 (minute) to 60 (minutes) for standby operation prior toentering the Super Power Saver mode.When PRINTER P.S. is selected:The screen below is displayed.1) Use the [ ↑ ] or [ ↓ ] keys to select the desired option (ON or OFF), then press[ENTER] key.ONTo select the Printer Power Saver mode.OFFTo deactivate the Printer Power Saver mode.When ON is selected, the screen below is displayed. Enter the desired TIME periodand press the [ENTER] key.START TIMETIME (01-60)MIN03PRINTER POWER SAVER1.ON2.OFFPRINTER POWER SAVERTIME PERIOD =00:00 - 00:00Enter the time period. The time on the left is the Printer Power Saver start time (ortime that the printer unit will power down). The time on the right is the Printer PowerSaver end time.The time period shown above is the factory default setting and signifies continuousPrinter Power Saver operation.(2) After the “OPERATION COMPLETED” message is displayed, press the [STOP] key toreturn to the Standby Mode Screen.
