DP120F/DP125F Function Settings 4-42 March 2000 © TOSHIBA TEC1.4.8 RX Multi Copy [MENU], [4], [3], [08]This is to set, on the receiving station, the number of copies of received documents.(1) Enter the desired number of copies, then press the [ENTER] key.COPY NUMBERUp to 99 copies for one received document can be entered. • When COPY NUMBER is 9 or less, enter two digits by adding a 0 (zero)before the number.• When more than 1 is set here, the setting will be effective to make all re-ceptions thereafter in Memory Reception mode.• The Collated Print function can be set together with the Receive Multi Copyfunction. In this case, data is printed out from the last page to the first page.• When the residual memory capacity is not enough, this setting will be de-activated and the normal reception mode will be regained.• When there is no more residual memory capacity remaining during a re-ception in Memory Reception mode, the setting of the Receive Multi Copyis disregarded and recording will occur in the ordinary recording procedurewith the Page 1 printed first.(2) After the message “OPERATION COMPLETED” is displayed, press the [STOP] key toreturn to the Standby Mode screen.RX MULTI COPYCOPY NUMBER =(01-99)01
