DP120F/DP125F Function Settings 4-6 March 2000 © TOSHIBA TECMF (Multi-frequency)Connects the telephone line of the facsimile unit, and uses it as a MF Line.DP (Dial pulse)Connects the telephone line of the facsimile unit, and uses it as a DP Line.(2) Then the Line 2 screen appears. Use the [ ↑ ] or [ ↓ ] key to move the cursor to the desiredoption (DP or MF) in the DIAL TYPE (LINE-2) screen, then press the [ENTER] key.(3) Enter the telephone number of your facsimile unit, then press [ENTER] key.TEL NUMBER = (MAX20)Enter a maximum of 20 digits including blank spaces and the International Code.When the Optional 2nd NCU PBA is installed, the screen in Step (3) is displayed for theLINE-2 setting. In this case repeat (2) through (3) for the LINE-2 requirements.(4) When the “OPERATION COMPLETED” message is displayed, press the [STOP] key toreturn to the Standby Mode screen.1.1.4 Dial Type [MENU], [3], [4]This setting is used to determine the dial type of the telephone line to which the facsimile unit isconnected.(1) Use the [ ↑ ] or [ ↓ ] keys to move the cursor to the desired option (DP or MF) in the DIALTYPE screen, then press the [ENTER] key.DIAL TYPE1.MF2.DPDIAL TYPE (LINE-2)1.MF2.DPMF (Multi-frequency)Connects the telephone line to Line 2 of the facsimile unit, and uses it as a MF Line.DP (Dial pulse)Connects the telephone line to Line 2 of the facsimile unit, and uses it as a DP Line. DIAL TYPE LINE-2 can not be set unless the optional 2nd NCU PBA isinstalled.01/12
