DP120F/DP125F Removal/Replacement 8-78 March 2000 © TOSHIBA TEC2.4.15 Base Paper GuideBefore disassembling or reassembling, be sure to refer to “1. Before Disassembling or Reas-sembling.”(1) Remove the rear cover. (Refer to “2.1.5 Rear Cover.”)(2) Remove the front cover assembly. (Refer to “2.1.6 Front Cover.”)(3) Remove the right side cover. (Refer to “2.1.7 Right Side Cover.”)(4) Remove the inner cover. (Refer to “2.1.13 Inner Cover.”)(5) Remove the paper pickup solenoid. (Refer to “2.4.7 Paper Pickup Solenoid (Bypass Tray).”)(6) Remove the printer frame right assembly. (Refer to “2.4.8 Printer Frame Right Assembly.”)(7) Remove the paper pickup roller assembly. (Refer to “2.4.9 Paper Pickup Roller Assembly(Bypass Tray).”)(8) Remove the front paper guide. (Refer to “2.4.10 Front Paper Guide.”)(9) Remove the pinch roller. (Refer to “2.4.11 Pinch Roller.”)(10) Remove the paper feed roller. (Refer to “2.4.12 Paper Feed Roller.”)(11) Remove the friction plate. (Refer to “2.4.13 Friction Plate.”)(12) Remove the friction plate guide. (Refer to “2.4.14 Friction Plate Guide.”)
