March 2000 © TOSHIBA TEC 4-135 DP120F/DP125F Function SettingsUAD 1 Bit 7 and 6:Sets the allowable gap during dial tome detection when calling directly to a PSTN. Indial tone detection, even if there are gaps within the time specified in this setting, thecounter is not reset and continues to count the duration of dial tone detection afterthe dial tone whose frequency is in the specified range is re-detected.UAD 1 Bit 5 to 3:Sets the method to detect the dial tone and line current when calling directly to aPSTN.• BZT (DTC/LCC) Performs German BZT type of detection• LCC 5 sec. Only 5 sec. Line current is detection• DTC only Only dial tone is detected.• DTC (USA) Only dial tone is detected. Duration of detected tone until itis regarded as the dial tone is fixed 3.3 msec. Even if nodial tone is detected, dialing will be started.• LCC 3 sec. 3 second line current detection is performed.• No check Neither dial tone nor line current is detedted.UAD 1 Bit 2 to 0:Sets the maximum waiting time for dial tone detection when calling directly to a PSTN.If the dial tone is not detected and redial attempt or internal retry will be performedlater.Default tableUS TYPE EUR TYPEBIT US TW SG HK DE GB IT BE NL FI ES AT CH SE DK NO PT FR AU7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 16 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 15 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 14 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 03 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 02 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
