March 2000 © TOSHIBA TEC 4-133 DP120F/DP125F Function SettingsUAD 0 Bit 7 to 5:Sets the range of the dial tone frequency that should be detected when calling di-rectly to a PSTN.UAD 0 Bit 4 to 2:Sets the time when the dial tone is recognized when calling directly to a PSTN.When a dial tone is continuously detected for the time specified, the facsimile re-gards the line as being connected.UAD 0 Bit 1 and 0:Sets the allowable gap during line current detection when calling directly to a PSTN.In line current detection, even if there are gaps within the time specified in this set-ting, the counter is not reset and continues to count the duration of line current detec-tion after the current is re-detected.When “BZT” is selected for “DTC/LCC for PSTN” in UAD 1, this setting is ignored.Default tableUS TYPE EUR TYPEBIT US TW SG HK DE GB IT BE NL FI ES AT CH SE DK NO PT FR AU7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 06 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 05 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 04 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 03 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 12 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
