March 2000 © TOSHIBA TEC 4-5 DP120F/DP125F Function Settings1.1.3 Terminal ID [MENU], [3], [3]This setting is performed to enter your own telephone (fax) number, terminal ID name and addthe international code which will be printed as TTI at the top of the received document on theremote party side. Be sure to input the Terminal ID information for LINE-2 if the optional 2ndNCU PBA is installed.(1) Entry the terminal ID name using the keyboard and press the [ENTER] key.Terminal IDA maximum of 40 digits can be entered including blank spaces. Refer to the section ofCharacter Entries in the Operator’s Manual.(2) Select the desired option using the [ ↑ ] or [ ↓ ] keys (to select ADD+ or NOT NEEDED),then press the [ENTER] key.After about 2 seconds→SET TERMINAL IDID NAME =(MAX40)ENTER NAMEID NAME =(MAX40)SET TERMINAL IDTEL NUMBER =(MAX20)INT. CODE ?1.ADD +2.NOT NEEDEDADD +Selected to attach an International Code (Country/Region Code). When selected, thesymbol “+” is attached before the telephone number of your facsimile unit. Select thisside if your facsimile unit is used for international fax communications.NOT NEEDEDSelected to not attach an International Code. Select this if your facsimile unit is usedsolely for fax communications inside your country/region.When either is selected, the screen below is displayed.01/12
