March 2000 © TOSHIBA TEC 11-37 DP120F/DP125F Troubleshooting1.7.2 TOTAL ERRORS [MENU], [9], [6], [02]This list outputs a history of communication errors that have occurred so that frequently occur-ring errors can be analyzed. The following items are recorded.TRANSMISSION/RECEPTIONIndicates whether the errors occurred during transmissions or receptions.STATUSIndicates the error codes in ascending order.HISTORYIndicates the previous history of errors transferred from the CURRENT COUNTER sideby “number of errors occurred / number of communications.” The time display field (onthe top row) indicates the time when counting started.CURRENT COUNTERIndicates errors which have occurred during the current recording period by “number oferrors occurred/number of communications.” When the number of communications onthe CURRENT COUNTER side reaches 1000, the number of errors is automatically trans-ferred to the HISTORY side, replacing the previous HISTORY, and clearing the error dataon the CURRENT COUNTER side. You can move error counter data from ACTUAL to HISTORY in manualmode. For the operational procedure, refer to "1.6.5 ERR COUNTER SHIFT"on page 11-32.(1) Use the [ ↑ ] or [ ↓ ] key to select the "02.TOTAL ERRORS", and then press the [ENTER]key.(2) Use the [ ↑ ] or [ ↓ ] key to select the line, and then press the [ENTER] key.(3) After completing the list output, the display returns to the standby mode screen. For asample list, refer to "12. APPENDIX" on page 12-2.
