Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 56 page image

583. Select a character by pressing the + or - button.The characters shown below can be selected insequence.Numeral: 0 1 2 3 4 5 6 7 8 9Alphabet: A to Z, a to zSymbols: ← → = ? ' " # $ % & ( ) * + , – . / : ;Space: •4. Move the cursor to the right in the editing area bypressing the B button, then select a character bypressing the + or - button.5. Repeat the above steps to select characters until thetitle for a certain camera is completed.6. If a wrong character is selected, move the cursor to thecharacter to be replaced by pressing the A or B but-ton.Select a character again by pressing the + or - but-ton.7. Repeat the above procedures 2 to 6 to edit other cam-era titles.8. When satisfied with all of the camera titles, press theSET UP/ESC button to return to the previous DISPLAYSETUP menu. Display Setting (Multiscreen Monitor)These items let you determine the display mode of theMultiscreen Monitor. Clock DisplayThis item lets you enable or disable the clock display on theMultiscreen Monitor.1. Move the cursor to the CLOCK DISPLAY parameter inthe DISPLAY SETUP menu by pressing the D or C but-ton.2. Select either ON or OFF by pressing the + or - but-ton.ON: Enables the clock display on the monitor screen.OFF: Disables the clock display on the monitor screen.The factory default setting is ON.The prodedure described below let you determine the dis-play such as the camera title editing, display on and off anddisplay position on the monitors.1. Move the cursor to DISPLAY SETUP in the WJ-HD500SETUP menu by pressing the D or C button, thenpress the SET button.The DISPLAY SETUP menu shown below appears onthe monitor screen.7 DISPLAY SETUPCAMERA TITLE SETUPMULTI OUTPUTCLOCK DISPLAY ONTITLE DISPLAY ONSTATUS DISPLAY ONBOADER LINE WHITESPOT OUTPUTTITLE DISPLAY ONALARM DISPLAY ONCLOCK&STATUS POSITION L-UPPERTITLE POSITION R-LOWER2. Select an item or item parameter in the menu by press-ing the D or C button.3. To return to the previous WJ-HD500 SETUP menu,press the SET UP/ESC button. Camera Title SetupThis item lets you edit the camera title to be displayed onthe monitor screen.Up to 8 alphanumeric characters can be displayed on themonitor screen.1. Move the cursor to CAMERA TITLE SETUP in the DIS-PLAY SETUP menu by pressing the D or C button,then press the SET button.The CAMERA TITLE SETUP menu shown belowappears on the monitor screen.7-1 CAMERA TITLE SETUPCAM TITLE CAM TITLE1 1••••••• 9 9•••••••2 2••••••• 10 10••••••3 3••••••• 11 11••••••4 4••••••• 12 12••••••5 5••••••• 13 13••••••6 6••••••• 14 14••••••7 7••••••• 15 15••••••8 8••••••• 16 16••••••2. Move the cursor to the camera title editing area youwant to edit by pressing the D, C, A or B button.DISPLAY SETUP