Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 46 page image

48 One Shot Recording (Internal Timer)As described before, the One Shot Recording is an eventrecording function reacting to an alarm input.It records the number of particular images that have acti-vated the alarm.These items let you determine the recording parameters forOne Shot Recording assigned in the program numbermenu (continued from Program Timer).1. Select the recording mode O/S in the program numbermenu by pressing the + or - button, then press theSET button.The selected One Shot Recording menu as shownbelow appears on the monitor screen.2. Move the cursor to the REC RATE parameter in themenu by pressing the D or C button, then select thedesired recording rate by pressing the + or - button.1 - 30FPS: Records the selected number of the freezeimage per second.The factory default setting is 15FPS.• 30FPS is the active selection when the FIELD/FRAMEparameter in the COMMON REC SETUP menu is set toFIELD.• 15FPS is the active selection when the FIELD/FRAMEparameter in the COMMON REC SETUP menu is set toFIELD or FRAME 3DIM OFF.3. Move the cursor to the QUALITY parameter by pressingthe D or C button, then select the desired image quali-ty by pressing the + or - button.SUPER FINE: For enhanced sharpness (CompressionRate 1/6)FINE: For fine image quality (Compression Rate 1/10)NORMAL: For normal image quality (Compression Rate1/16)EXTENDED: For extended time recording quality(Compression Rate 1/25)The factory default setting is SUPER FINE.3-1-1-1 PROG1-NO1-G1 REC SETUPO/S(EVENT RECORDER ONE SHOT)REC MODEREC RATE 15FPSQUALITY SUPER FINEPICTURES 164. Move the cursor to the PICTURE parameter by pressingthe D or C button, then select the number of freezeimages to be recorded by pressing the + or - button.4 to 60: Records the selected number of freeze imagesfor One Shot Recording.The factory default setting is 16.5. Press the SET UP/ESC button to return to the previousprogram number menu.