Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 78 page image

80HDDEmergency RecorderManual RecorderEmergency RecorderGroup 1TimerRecorderGroup 2Group 3Group 4• Set to ALM-ONLYRecords the particular images that have activated the alarm. Emergency RecordingThe Emergency Recording is given priority over for recording images.This recording is controlled through input from the CONTROL port on the rear of the Disk Recorder.It records all camera images during Time Lapse Recording with the specified recording rate, quality and duration.Refer to EMERGENCY REC SETUP menu for further details.• Set to ALM-PRIRecords the alarm-activated input images preferentially over other video inputs. Alarm Recording for Timer ModesAs described before, there are three recording modes for Timer Recording: Time Lapse, Multi Shot and One Shot Recording.Two of these, Multi Shot and One Shot recording, are event-recording functions reacting to an alarm input. Therefore, there isno difference compared to an alarm recording.The procedure described below is an example for alarm recording in the Time Lapse Recording mode.• Time Lapse RecordingWhen the Time Lapse Recording mode is selected for Timer recording, it records the alarm-activated images in this modewith the specified recording rate, image quality and duration, as shown below.The recording pattern varies according to the setting of the Dynamic Recording parameter (DYNAMIC REC).(If the camera inputs 2, 4 and 5 are assigned to a group.)• Set to GROUPRecords the group input images in sequence starting with the lower number of the video input.C2 C2C4 C5 C2 C4 C5 C2 C4 C5 C2 C4 C5T TStartThumbnail ThumbnailAlarm 2 inC2 C2C4 C5 C2 C4 C4 C4 C5 C4 C2 C4 C4T TStartThumbnail ThumbnailAlarm 4 inT ThumbnailC2 C2C4 C5 C2 C2 C2 C2 C2 C5 C5 C5 C5T T TStartThumbnail Thumbnail ThumbnailAlarm 2 in Alarm 5 in