Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 40 page image

42Manual Recording SetupThe Disk Recorder can be recorded the images in TimeLapse recording when the REC button is pressed manually.Manual Recording is disabled when the TIMER in the setupmenu is set to something other than OFF.These settings are also valid for External Timer Recordingwhen the TIMER in the setup menu is set to EXT.These items let you determine the image quality and activemode for manual recording.1. Move the cursor to MANUAL in the WJ-HD500 SETUPmenu by pressing the D or C button.2. Pressing the + or - button will toggle the display onthe cursor as shown below.3. Pressing the SET button will call up the MANUAL RECSETUP menu according to the specified audio function,as shown below.→ MANUAL WITH AUDIO → MANUAL WITHOUT AUDIO →4. To return to the previous WJ-HD500 SETUP menu,press the SET UP/ESC button. Manual Recording Mode Setting1. Move the cursor to the MANUAL REC MODE parameterin the MANUAL REC SETUP menu by pressing the D orC button.2. Select the recording time mode to be set by pressingthe + or - button.SF-✽✽H or SF-A*✽✽H: Selects the recording timemode in enhanced fine quality.FQ-✽✽H or FQ-A*✽✽H: Selects the recording timemode in fine quality.NQ-✽✽H or NQ-A*✽✽H: Selects the recording timemode in normal quality.EX-✽✽H or EX-A*✽✽H: Selects the recording timemode in extended quality.SP or SP-A*: Freely selectableOFF: Enables only the alarm recording.✽✽ indicates the hours for recording time mode:2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480,720, 960, 1200, 1440, 2160, 2880, 3600, 4320,6480, 8640(parameter A* indicates recording with audio)When the parameter SF / FQ / NQ / EX is selected forrecording time, the recording rate and quality are auto-matically set according to the selected recording time.Note: It may not be possible to set the recording time,depending on the remaining storage capacity of thehard disk.The factory default setting is SF-24H.3. If the parameter SP is selected for recording time, movethe cursor to the REC RATE parameter by pressing theD or C button, then select a recording rate by pressingthe + or - button.1 - 30FPS: Records the selected number of freezeimages every second.0.5FPS: Records a freeze image every 2 seconds.0.4FPS: Records a freeze image every 2.5 seconds.0.3FPS: Records a freeze image every 3.3 seconds.0.2FPS: Records a freeze image every 5 seconds.0.1FPS: Records a freeze image every 10 seconds.Notes:• 30FPS is the active selection when theFIELD/FRAME parameter in the COMMON RECSETUP menu is set to FIELD.• 15FPS is the active selection when theFIELD/FRAME parameter in the COMMON RECSETUP menu is set to FIELD or FRAME 3DIM OFF.Move the cursor to the QUALITY parameter by pressingthe D or C button, then select a recording image quali-ty by pressing the + or - button.SUPER FINE: For enhanced sharpness (CompressionRate 1/6)FINE: For fine image quality (Compression Rate 1/10)NORMAL: For normal image quality (Compression Rate1/16)EXTENDED: For extended time recording quality(Compression Rate 1/25)The factory default setting is SUPER FINE.2 MANUAL REC SETUP(WITH AUDIO)MANUAL REC MODE SF-24HREC RATE 7.5FPSREC QUALITY SUPER FINEALARM REC MODE SF- 24HREC RATE 7.5FPSREC QUALITY SUPER FINEDURATION 10SDYNAMIC REC OFF