Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 45 page image

47Multi Shot Recording (InternalTimer)As described before, the Multi Shot Recording is an eventrecording function reacting to an alarm input.It records the number of images in pre- and post-recording.Pre-recording is the recorded images during standby, priorto the input of the alarm signal.Post-recording is the recorded images after the input of thealarm signal.These items let you determine the recording parameters forMulti Shot Recording assigned in the program numbermenu (continued from Program Timer).1. Select the recording mode M/S in the program numbermenu by pressing the + or - button, then press theSET button.The selected Multi Shot Recording menu as shownbelow appears on the monitor screen.2. Move the cursor to the REC RATE parameter in themenu by pressing the D or C button, then select thedesired recording rate by pressing the + or - button.1 - 30FPS: Records the selected number of freezeimages every second.0.5FPS: Records a freeze image every 2 seconds.0.4FPS: Records a freeze image every 2.5 seconds.0.3FPS: Records a freeze image every 3.3 seconds.0.2FPS: Records a freeze image every 5 seconds.0.1FPS: Records a freeze image every 10 seconds.The factory default setting is 15FPS.• 30FPS is the active selection when the FIELD/FRAMEparameter in the COMMON REC SETUP menu is set toFIELD .• 15FPS is the active selection when the FIELD/FRAMEparameter in the COMMON REC SETUP menu is set toFIELD or FRAME 3DIM OFF.3. Move the cursor to the QUALITY parameter by pressingthe D or C button, then select a recording image quali-ty by pressing the + or - button.SUPER FINE: For enhanced sharpness (CompressionRate 1/6)FINE: For fine image quality (Compression Rate 1/10)3-1-1-1 PROG1-NO1-G1 REC SETUPM/S(EVENT RECORDER MULTI SHOT)REC MODEREC RATE 15FPSQUALITY SUPER FINEPRE PICTURES 15POST PICTURES 60DYNAMIC REC OFFNORMAL: For normal image quality (Compression Rate1/16)EXTENDED: For extended recording quality(Compression Rate 1/25)The factory default setting is SUPER FINE.4. Move the cursor to the PRE PICTURES parameter bypressing the D or C button, then select a number ofthe pre-recording image by pressing the + or - but-ton.0: Disables pre-recording.4 to maximum: Sets the number of images for pre-recording.• The maximum number of the pre-recording is deter-mined by the setting of FIELD/FRAME and QUALITY.The factory default setting is 15.2. Move the cursor to the POST PICTURES parameter bypressing the D or C button, then select a number ofthe post-recording image by pressing the + or - but-ton.4 to 200: Sets the number of images for post-recording.The factory default setting is 60.3. Move the cursor to the DYNAMIC REC parameter bypressing the D or C button, then select the recordingpattern for post-recording by pressing the + or - but-ton.OFF: Records the images assigned to group inputs,including the one that has activated the alarm (thesame as pre-recording).ALM-ONLY: Records the particular image that has acti-vated the alarm.The factory default setting is OFF.6. Press the SET UP/ESC button to return to the previousprogram number menu.