Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 6 page image

6MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front ViewREMOTOTIMEROPERATEFULLHDD SEQUENCESETLOCKALARMALARMRESETALARMSUSPENDMULTISCREENSELECTSET UP/ESCGROUPSELECTSPOTMULTISCREENDAYLIGHT SAVINGSEL-ZOOMCOPYREC PREVIEW INDEXSTOP PLAY/ PAUSE RECFWDREVALARM SEARCHDISPLAYREC STOP1 2 3 413 14 15 169 10 11 125 6 7 8Digital DiskRecorderWJ-HDFS 16qwe t y u !0 !1r i o!3 !4 !5 !6 !7 !8 !9 @0!2@1@3@4@5@6 @2@7@8@9#0#1q Operate Indicator (OPERATE)Is on when the power of the WJ-HD500 Digital DiskRecorder is turned on.w Timer Indicator (TIMER)Lights to indicate when the TIMER is set to INT (internaltimer) in the setup menu.e Remote Indicator (REMOTE)Lights to indicate when the Disk Recorder is controlledby an outboard device via the Serial or 10/100BASE-Tport on the rear of the Disk Recorder.r Alarm Suspend Indicator (ALARM SUSPEND)Lights to indicate that the alarm suspension mode isselected.t Alarm Reset Button (ALARM RESET)This button cancels an activated alarm.Pressing this button will reset the alarm and return thesystem to the condition before the alarm function wasactivated.y Alarm Indicator (ALARM)This indicator blinks to indicate that an alarm conditionexists.It changes to a steady light when the alarm is resetautomatically.To turn the indicator off, press the ALARM RESET but-ton.u Sequence Button (SEQUENCE)Runs the assigned sequence on the selected monitorscreen.In this mode, a series of camera images is displayed insuccession on the monitor screen for the specifiedduration.i Multiscreen Selection Button (MULTISCREENSELECT)Selects the multiscreen pattern to be displayed on theMultiscreen Monitor that is connected to the MULTISCREEN OUT on the rear of the Recorder.Pressing this button will toggle the display on the moni-tor screen as shown below.4 → 7 → 9 → 10 → 13 → 16 → 4 screen segmentso Monitor Selection Button (SPOT / MULTISCREEN)Selects to control the display on the screen for eitherthe Spot or Multiscreen Monitor.Pressing this button will toggle the indicator on the but-ton on and off to indicate the selected monitor as shownbelow.On: Indicates the Spot monitor is selected.Off: Indicates the Multiscreen monitor is selected.!0 Lock Button (LOCK)This button is used to lock out operation of the DiskRecorder controls.While the indicator on the button is lit, control from theDisk Recorder is disabled.