81The recorded images on the disk can be played back onthe Multiscreen Monitor.The procedures described below are for operations playingback the hard disk.Refer to the PLAYBACK MODE or THUMBNAIL parameterin the COMMON REC SETUP menu for the play back setup. Basic Playback1. Select the group to be played back by pressing theGROUP SELECT button.2. Pressing the PLAY/PAUSE button will play back themost recent recordings in the forward direction.The indicator in the button lights, and the selectedimages appear on the monitor screen.(B) appears on the monitor screen to indicate thatplayback is selected.PLAY/ PAUSEyNote: When the ALARM SEARCH button is on, the DiskRecorder plays back an alarm recorded on theHard Disk.3. Pressing the PLAY/PAUSE button during playback willpause playback.The indicator in the button blinks and (y) appears onthe monitor to indicate that playback pause is selected.PLAY/ PAUSEy4. To resume playback, press the PLAY/PAUSE button.The indicator in the button lights again and (B)appears on the monitor screen.5. To stop playback, press the STOP button.The indicator in the PLAY/PAUSE button goes off, andthe live images previously selected appear.STOP• Forward or Backward searchThe recorded images can be searched playing back atvariable speeds.During playback or playback pause, hold down theShuttle Ring clockwise or counterclockwise to searchimages as shown below.By rotating the ring angle the search speed can becontrolled in either direction.qwerq werFWDREVRotateq 1/2 times speedw 1 times speede 2 times speedr 5 times speedClockwise: Search ForwardCounterclockwise: Search Backward• Forward or Backward field advanceThe recorded images can be searched one-by-one,displaying field by field.During playback pause, rotating the JogDial clockwiseor counterclockwise to advance an image field by fieldas shown below.FWDREVRotateClockwise: Forward Field AdvanceCounterclockwise: Backward Field AdvancePLAYBACK