Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 38 page image

402. Move the cursor to the group editing area for the cam-eras by pressing the A, B, D or C buttons.3. Select a group number (1 to 4) to be assigned bypressing the + or - button.The factory default setting is 1.4. Repeat the above step 2 and 3 to assign the groupnumber for other cameras.5. When all camera assignments are completed, press theSETUP/ESC button to return to the previous COMMONREC SETUP menu.2. Move the cursor to the group editing area to be editedby pressing the D or C button.3. Select a character by pressing the + or - button.The characters shown below can be selected insequence.Numeral: 0 1 2 3 4 5 6 7 8 9Alphabet: A to Z, a to zSymbols: ← → = ? ' " # $ % & ( ) * + , – . / : ;Space: •4. Press the B button to move the cursor to the right, thenselect a character by pressing the + or - button.5. Repeat the above steps 3 and 4 until all characters arecompleted for the selected group title.If a wrong character is selected, move the cursor to thecharacter to be replaced by pressing the A or B but-ton, then select a new character by pressing the + or- button.6. Repeat the above steps 2 to 5 to edit other group titles.7. When satisfied with all the group titles, press the SETUP/ESC button to return to the previous COMMON RECSETUP menu.1-2 GROUP SETUP(TITLE)GROUP1 G1••••••GROUP2 G2••••••GROUP3 G3••••••GROUP4 G4•••••• Group Title SetupThis item lets you edit the group title to be displayed on themonitor screen.Each title is composed of 8 alphanumeric characters.1. Move the cursor to TITLE in the COMMON REC SETUPmenu by pressing the D or C button, then press theSET button.The GROUP SETUP (TITLE) menu as shown belowappears on the monitor screen. Group SetupAs described before, the Disk Recorder activates therecording function of the assigned cameras in four groupswhen the TIMER is set to INT (internal).These items let you determine the camera’s group forrecording. Camera Assignment1. Move the cursor to CAMERA ASSIGNMENT in theCOMMON REC SETUP menu by pressing the D or Cbuttons, then press the SET button.The GROUP SETUP (CAMERA ASSIGNMENT) menu asshown below appears on the monitor screen.1-1 GROUP SETUP(CAMERA ASSIGNMENT)CAM GROUP CAM GROUP1 1 9 12 1 10 13 1 11 14 1 12 15 1 13 16 1 14 17 1 15 18 1 16 1