Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 41 page image

43 Alarm Recording (Manual Recording)These items let you set the recording mode in Time LapseRecording when an alarm is activated during manualrecording.1. Move the cursor to the ALARM REC MODE parameterby pressing the D or C button, then select a recordingtime mode by pressing the + or - button.The parameters are the same as MANUAL REC MODE.The factory default setting is SF-24H.2. Move the cursor to the REC RATE parameter by press-ing the D or C button, then select a recording rate bypressing the + or - button.For details refer to REC RATE in this menu.3. Move the cursor to the REC QUALITY parameter bypressing the D or C button, then select a recordingimage quality by pressing the + or - button.For details refer to REC QUALITY in this menu.4. Move the cursor to the DURATION parameter by press-ing the D or C button, then select an alarm recordingduration by pressing the + or - button.OFF: Disables alarm recording.10S - 6M: Enables alarm recording for between 10 sec-onds and 6 minutes.MANUAL: Enables alarm recording while the alarm sig-nal is received from the ALARM port.CONTINUE: Enables alarm recording until the RECSTOP is pressed.The factory default setting is 10S.5. Move the cursor to the DYNAMIC REC parameter bypressing the D or C button, then select an alarmrecording pattern by pressing the + or - button.OFF: Records all input images.ALM-PRI: Records the alarmed input images preferen-tially over other video inputs.ALM-ONLY: Records the particular images that haveactivated the alarm.The factory default setting is OFF.