Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 43 page image

452. Move the cursor to the DATE editing area by pressingthe D or C button.3. Select a month by pressing the + or - button.Move the cursor to the right by pressing the B button,then select the date by pressing the + or - button.Note: The programmed month and date will be valid forevery year.4. Move the cursor to the ACT editing area by pressingthe B button, then select the day of the week by press-ing the + or - button.5. Repeat the above steps 2 to 4 to program the otherspecial days.6. When satisfied with all special days, press the SETUP/ESC button to return to the previous TIMER RECSETUP menu.S TIMER SPECIAL DAY SETUPDATA ACT DATA ACT DATA ACT1 JUL04 SUN 11 ----- --- 21 ----- ---2 ----- --- 12 ----- --- 22 ----- ---3 ----- --- 13 ----- --- 23 ----- ---4 ----- --- 14 ----- --- 24 ----- ---5 ----- --- 15 ----- --- 25 ----- ---6 ----- --- 16 ----- --- 26 ----- ---7 ----- --- 17 ----- --- 27 ----- ---8 ----- --- 18 ----- --- 28 ----- ---9 ----- --- 19 ----- --- 29 ----- ---10 ----- --- 20 ----- --- 30 ----- --- Special Day TimerBefore programming this table, confirm that the ProgramTimer is programmed completely.This table allows for up to 30 days to be defined as specialdays.In this table, 30 specific user defined days are assigned toone day of the week.1. Move the cursor to TIMER SPECIAL DAY in the TIMERREC SETUP menu by pressing the D or C button, thenpress the SET button.The TIMER SPECIAL DAY SETUP table as shown belowappears on the monitor screen. External Program TimerThe internal timer can be changed to the specified timerpreviously programmed by the input from the externaltimer. This function is enabled, when a contact is connect-ed with pin 22 of the ALARM port.This item lets you enable or disable the external timer forrecording.1. Move the cursor to the EXT REC MODE parameter inthe TIMER REC SETUP menu by pressing the D or Cbutton.2. Select the desired program to be changed by pressingthe + or - button.PROG1 - 4: Selects a timer assigned program number.---: Disables the external program timer.The factory default setting is PROG1.3. Press the SET button to display the assigned programnumber menu previously programmed.If the program number menu has not been edited previ-ously, edit the assigned program number menu asdescribed before.4. Press the SET UP/ESC button to return to the previoussetup menu. Time Lapse Recording (InternalTimer)These items let you set the recording parameters for TimeLapse Recording assigned in the program number menu.(Continued from Program Timer)1. Select the recording mode T/L in the program numbermenu by pressing the + or - button, then press theSET button.The selected Time Lapse Recording menu shownbelow appears on the monitor screen.3-1-1-1 PROG1-NO1-G1 REC SETUPT/L(TIME LAPSE RECORDER)TIMER REC MODE SF-24HREC RATE 7.5FPSQUALITY SUPER FINEALARM REC MODE SF- 24HREC RATE 7.5FPSQUALITY SUPER FINEDURATION 10SDYNAMIC REC OFF