Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 44 page image

462. Move the cursor to the TIMER REC MODE parameter inthe menu by pressing the D or C button.3. Select the recording time mode to be set by pressingthe + or - button.SF-✽✽H or SF-A*✽✽H: Selects the recording timemode in enhanced fine quality.FQ-✽✽H or FQ-A*✽✽H: Selects the recording timemode in fine quality.NQ-✽✽H or NQ-A*✽✽H: Selects the recording timemode in normal quality.EX-✽✽H or EX-A*✽✽H: Selects the recording timemode in extended quality.SP or SP-A*: Freely selectableOFF: Enables only the alarm recording.✽✽ indicates the hours for recording time mode:2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480,720, 960, 1200, 1440, 2160, 2880, 3600, 4320,6480, 8640(parameter A* indicates recording with audio)When the parameter SF / FQ / NQ / EX is selected forrecording time, the recording rate and quality are auto-matically set according to the selected recording time.Note: It may not be possible to set the recording time,depending on the remaining storage capacity of thehard disk.The factory default setting is SF-24H.4. If the parameter SP is selected for recording time, movethe cursor to the REC RATE parameter by pressing theD or C button, then select a recording rate by pressingthe + or - button.1 - 30FPS: Records the selected number of freezeimages every second.0.5FPS: Records a freeze image every 2 seconds.0.4FPS: Records a freeze image every 2.5 seconds.0.3FPS: Records a freeze image every 3.3 seconds.0.2FPS: Records a freeze image every 5 seconds.0.1FPS: Records a freeze image every 10 seconds.• 30FPS is the active selection when the FIELD/FRAMEparameter in the COMMON REC SETUP menu is set toFIELD .• 15FPS is the active selection when the FIELD/FRAMEparameter in the COMMON REC SETUP menu is set toFIELD or FRAME 3DIM OFF.Move the cursor to the QUALITY parameter by pressingthe D or C button, then select a recording image quali-ty by pressing the + or - button.SUPER FINE: For enhanced sharpness (CompressionRate 1/6)FINE: For fine image quality (Compression Rate 1/10)NORMAL: For normal image quality (Compression Rate1/16)EXTENDED: For extended time recording quality(Compression Rate 1/25) Alarm RecordingThese items let you set the recording mode in Time LapseRecording when an alarm is activated during the recordingwith the internal programmed timer.1. Move the cursor to the ALARM REC MODE parameterby pressing the D or C button, then select a recordingtime mode by pressing the + or - button.The parameters are the same as TIMER REC MODE.For details refer to TIMER REC MODE in this menu.2. Move the cursor to the REC RATE parameter by press-ing the D or C button, then select a recording rate bypressing the + or - button.For details refer to REC RATE in this menu.3. Move the cursor to the QUALITY parameter by pressingthe D or C button, then select a recording image quali-ty by pressing the + or - button.For details refer to QUALITY in this menu.4. Move the cursor to the DURATION parameter by press-ing the D or C button, then select the alarm recordingduration by pressing the + or - button.10S - 6M: Enables alarm recording for between 10 sec-onds and 6 minutes.MANUAL: Enables alarm recording while the alarm sig-nal is received from the ALARM port.CONTINUE: Enables alarm recording until the RECSTOP is pressed.The factory default setting is 10S.5. Move the cursor to the DYNAMIC REC parameter bypressing the D or C button, then select an alarmrecording pattern by pressing the + or - button.OFF: Records the images assigned to the group inputsincluding the one which has activated the alarm.ALM-PRI: Records the alarm input images preferential-ly over other video inputs.ALM-ONLY: Records the particular images that have-activated the alarm.The factory default setting is OFF.6. Press the SET UP/ESC button to return to the previousprogram number menu.