Panasonic TH-65SF2U Operating Instructions Manual

Also see for TH-43SF2E: Operating Instructions - Basic Guide

Contents

Panasonic TH-65SF2U Operating Instructions Manual Manual pdf 94 page image

English94USB media playerFunction descriptionThe USB media player displays still pictures andmotion pictures saved in a USB memory by insertingthe USB memory device into the display unit.Note● To use this function, set [USB media player] to[Enable] in [Setup] - [USB media player settings]. (seepage 62)● When using the “Single Media Player”, the unitprevents a black screen from appearing at theswitching timing of still pictures or motion pictures.Note the following restrictions.(1) A black screen may appear when switching amotion picture codec.(2) A black screen may appear or images may bedisturbed when switching to motion pictures of adifferent frame rate or aspect ratio.If an angle of view for something other than for16:9 is used, images may be disturbed near theend of playback.Inserting a black screen (approx. 2 sec.) at theswitching timing for all the motion pictures can avoidimage disturbance in above (2).([USB media player settings] (see page 62))● Using the content list delivery function of the MultiMonitoring & Control Software (see page 85), content(still/motion pictures) played back on a USB mediaplayer and the playback list can be delivered.(Still pictures that can be delivered are only jpg files.)For details, refer to the manual of Multi Monitoring &Control Software.Single Media PlayerFiles are played by a single unit.USBmemoryMulti Media PlayerConnecting more than one unit using LAN cables playsback files in the USB memory simultaneously.One of the multiple units becomes the parent, and theothers are children. The two-unit configuration exampleis shown below.For LAN connection, see “Network environment (MultiMedia Player only)” (see page 99).USBmemoryParent ChildUSBmemoryHub or broadband routerNote● For Multi Media Player, one USB memory device isrequired for one unit.● For Multi Media Player, the parent requires both“scenario.dat” and “filelist.dat”, and the child requires“filelist.dat” only.● Describe “GroupID:G01” without changingcharacters other than numbers (2-digit descriptionrequired). Without description, the Multi Media Playerdoes not function.● When motion pictures are played on the multi mediaplayer, a black screen may be displayed for a certainperiod of time at the switching timing of motionpictures.