Panasonic TH-65SF2U Operating Instructions Manual

Also see for TH-43SF2E: Operating Instructions - Basic Guide

Contents

Panasonic TH-65SF2U Operating Instructions Manual Manual pdf 64 page image

English64■ [Auto display operation guide]When this is set to [On], the operation guide isautomatically displayed at the beginning of thecontent playback, and the information is automaticallyerased after a certain period of time.The playback control (see page 106) is performedonly while the operation guide is being displayed. If itis not displayed, the unit shows the operation guidewithout performing the playback control.When this is set to [Off], the operation guide is notdisplayed at the beginning of the content playback.The playback control is performed regardless ofShow/Hide of the operation guide.Note● When [Play method] is set to [Single], playbackinformation and operation guide are automaticallydisplayed only at the beginning of the first playbackof content.● This menu will be greyed out and cannot be set whilecontent is being played.Function button settingsAssigns specific functions to the numeric buttons (<1>to <6>). The buttons can be used as shortcut keys byassigning frequently used operations.1 Switch [Function group] with .[Function button settings] - submenu screenPCDVI-DDIGITAL LINKHDMI1USBFunction button settingsFunction groupFunction button 1Function button 2Function button 3Function button 4Function button 5Function button 6 MEMORY VIEWERFunction button guideInput Input↓Memory load↓ShortcutOn2 Select the numeric button withand set the function to assign with.■ Functions assignable to the numericbuttons[Input] (Direct input select)Input can be selected with single-touch operation.[HDMI1] / [HDMI2] / [DIGITAL LINK] / [DVI-D] /[PC] / [VIDEO] / [USB] / [MEMORY VIEWER][Memory load]Memory can be loaded with single-touch operation.Refer to “Memory load”. (see page 45)[MEMORY1] to [MEMORY6]● [MEMORY1] to [MEMORY6] load functions arealready assigned to <1> to <6> respectively.These settings cannot be changed.[Shortcut][Signal], [Screensaver], [Set up timer], [Powermanagement settings], [Network settings],[Multi display settings]● Pressing the numeric button displays the menuscreen. Pressing the button again exits themenu screen.[AV mute]● Pressing the numeric button mutes the audioand pictures.To cancel, press any button on the remotecontrol except the .[Digital zoom]● Switches to [Digital zoom] mode by pressingnumeric buttons. (see page 35)[Display ID / Display name]● Pressing the numeric button enlarges [DisplayID] and [Display name].[HDMI-CEC operation]● Press the numeric buttons to display theoperation screen of the HDMI-CEC compatibledevice.Shipping conditionThe following functions are assigned to the numericbuttons as factory default.TH-65SF2E[Input] [Memoryload] [Shortcut]1 HDMI1 MEMORY1 [Signal]2 DIGITAL LINK MEMORY2 [Screensaver]3 DVI-D MEMORY3 [Set up timer]4 PC MEMORY4 [Networksettings]5 USB MEMORY5 [AV mute]6 MEMORYVIEWER MEMORY6 [HDMI-CECoperation]TH-65SF2U, TH-55SF2U, TH-49SF2U, TH-43SF2U,TH-55SF2E, TH-49SF2E, TH-43SF2E[Input] [Memoryload] [Shortcut]1 HDMI1 MEMORY1 [Signal]2 HDMI2 MEMORY2 [Screensaver]3 DVI-D MEMORY3 [Set up timer]4 PC MEMORY4 [Networksettings]5 USB MEMORY5 [AV mute]6 MEMORYVIEWER MEMORY6 [HDMI-CECoperation]