Panasonic TH-65SF2U Operating Instructions Manual

Also see for TH-43SF2E: Operating Instructions - Basic Guide

Contents

Panasonic TH-65SF2U Operating Instructions Manual Manual pdf 80 page image

English80Other● This device is compatible with Panasonic devices thatsupport DIGITAL LINK output (ET-YFB100G, ET-YFB200G). For the twisted pair cable transmitter ofother manufacturers, see the web site:https://panasonic.net/cns/prodisplays/solutions/digital_link/compatible_equipment/● Panasonic has tested other manufacturers’ devicesaccording to our check items. This will not guaranteeall the operations. For operation and performancedefects caused by other manufacturers’ devices,contact each manufacturer.Command controlNetwork function of the unit can control the unit in thesame way as serial control from a network.Supported commandsCommands used in the serial control are supported.(see page 24)Control Command via LANThe communication differs whether [Options] - [LANcontrol protocol] is set to [Protocol 1] or [Protocol 2].1. When [LAN control protocol] is setto [Protocol 1].Communicates using the display-specific protocol.■ When the WEB control administratorprivileges password has been set (Protectmode)Connection method1 Obtain the display’s IP address and the port number(Default is 1024), and request connection to thedisplay.The IP address and the port number can be obtainedfrom the following menus.• IP address:[Setup] → [Network settings] → [LAN setup] or[Network status]• Port number:[Setup] → [Network settings] → [LAN setup]● For more detail of the settings, see page 59.2 The display responds.Response dataData part Space Mode SpaceRandomnumberpartLastterminalsymbol[PDPCONTROL](ASCIIcharacterstring)[ ]0x20[1]0x31[ ]0x20[zzzzzzzz](ASCIIcode hexnumber)(CR)0x0d10 bytes 1 byte 1 byte 1 byte 8 bytes 1 byteMode:1 = Protect mode3 Hash the following data with the MD5 algorithm, andgenerate a 32-byte hash value.[zzzzzzzzyyyyy]zzzzzzzz :8-byte random number obtained in step 2yyyyy :Password of the WEB control administratorprivileges user● Default user name and password are as follows:User name: dispadminPassword: @PanasonicCommand transmission methodTransmit in the following command formatTransmitted dataHeader Controlsymbol Data part ControlsymbolLastterminalsymbolHash value(see“Connectionmethod”)(STX)0x02Controlcommand(ASCIIcharacterstring)(ETX)0x03(CR)0x0d32 bytes 1 byte Undefined 1 byte 1 byteReceived dataControlsymbol Data part ControlsymbolLastterminalsymbol(STX)0x02Controlcommand(ASCIIcharacterstring)(ETX)0x03(CR)0x0d1 byte Undefined 1 byte 1 byte