English110Data CloningMenu settings and adjusted values of a single displaycan be copied to multiple displays via LAN or using aUSB memory.■ Data that can be copiedSettings and set values of [Picture], [Sound], [Setup],[Position] and [Options] menusUser image registered in [Setup] - [Image settings]● The following data cannot be copied. Setting isrequired for each display.[Date and time]Setting for [Network settings] - [LAN setup][Synchronize display setting][Time zone][NTP synchronization]NTP server nameDNS serverDisplay ID in [Display ID]■ Supported device● Commercially available USB memory devices aresupported. (Those with security functions are notsupported.)● USB memory devices other than those formatted inFAT16 or FAT32 cannot be used.● Up to 32 GB of USB memory in size are supported.● Only single partition configuration is supported.Note● If the sizes of the displays are different, the cloningfunction does not operate. Use the common sizeddisplays.● Set the input to something other than [USB] or[MEMORY VIEWER], and perform the data cloning.● [USB data cloning] menu can also be displayed usingthe main unit buttons.Operate in the same way as described in “OptionsAdjustments” - “Unit” (see page 67).● The remote control is necessary to operate [LAN datacloning].Copying data to other display viaLAN1 Display [Setup] menu pressing.2 Select [OSD language] with andpress for over 3 seconds.The following display appears.OptionsDisplay software informationLAN data cloningUSB data cloningSoftware licensesShipping3 Select [LAN data cloning] withand press .4 Select [Select display] with andpress .Displays on the same subnet are listed.Status Display name IP addressLAN data cloningExecuteWrite protect OffSelect display5 Select the display to copy the datato with and press .Select all the displays to copy the data to.SF2-001Please check the display to register.Check Display name IP address192.168. 0. 1192.168. 0. 2192.168. 0. 4192.168. 0. 25192.168. 0. 31192.168. 0. 7192.168. 0.124192.168. 0.211SF2-002SF2-004SF2-005SF2-014SF2-006SF2-041SF2-009Select display6 Press .