Panasonic TH-65SF2U Operating Instructions Manual

Also see for TH-43SF2E: Operating Instructions - Basic Guide

Contents

Panasonic TH-65SF2U Operating Instructions Manual Manual pdf 56 page image

English56Multi display settings1 to 10 displays can be aligned in horizontal directionand vertical direction respectively, and those displaysare regarded as one group. The enlarged image isshown on the combined display.[Multi display settings]- submenu screenMulti display settingsMulti display settingHorizontal scaleBezel H adjustmentVertical scaleBezel V adjustmentLocationOff22A1Note● The settings are memorised separately for eachinput terminal.● When the multi display is set to [Off], adjust to thesame angle of view for [Position] (see page 38).Then, set the multi display to [On]. Again, makefine adjustment of the angle of view for [Position].● The [Position] menu can be adjusted in the multidisplay status.● For USB input, [Horizontal scale] and [Verticalscale] can be set only with the followingcombinations.1 × 2, 1 × 3, 1 × 4, 2 × 1, 2 × 2, 3 × 1, 4 × 1■ [Multi display setting][Off]:The display is not divided when enlarged.[On]:The display is divided when enlarged.When [On] is set, the display aspect is [16:9].■ [Horizontal scale]Set the horizontal scale in the multi display.1 to 10■ [Vertical scale]Set the vertical scale in the multi display.1 to 10Example:[Horizontal scale] [5] and [Vertical scale] [5] is set inthe multi display■ [Bezel H adjustment] / [Bezel V adjustment]Adjust the area of image hidden in the jointhorizontally and vertically respectively.0 ‒ 100Display exampleSetting value: 0Displays the entire image including the joint area.(Suitable when displaying character informationon PC.)Setting value: 100Does not display the image of the joint area.(Suitable when displaying motion pictures.)■ [Location]Assign the multi display position.Example:[Horizontal scale] [10], [Vertical scale] [10]A1 A2 ....................B1 B2.... ....A9B9....J1 J2 J9I1 I2 I9A10B10....I10J10Select from A1 to J10.● The displayed content for setting changesaccording to the settings for the [Horizontal scale]and [Vertical scale].● By setting [Multi display setting] to [Off], it ispossible to check the location on the screen whilethe setting menu is displayed.