31English■When the Unit is turned on for the first timeFollowing screen will be displayed.1Select the language withandpress .English (UK)DeutschFrançaisItalianoEspañolENGLISH (US)РусскийOSD language2For vertical installation, select[Portrait] withand press.Display orientationLandscapePortraitNote●Once the items are set, the screens won’t bedisplayed when switching on the unit next time.Each item can be reset in the following menus.[OSD language] (see page 55)[Display orientation] (see page 65)■Power ON messageThe following message may be displayed when turningthe unit power ON:No activity power off Precautions'No activity power off' is enabled.When [No activity power off] in the [Setup] menu is set to[Enable], a warning message is displayed every time thepower is turned ON. (see page 55)“Power management” InformationLast turn off due to 'Power management'.When “Power management” is functioned, aninformation message is displayed every time the poweris turned ON. (see page 51)These message displays can be set with the followingmenu:●[Options] menuPower on message(No activity power off)(see page 76)Power on message(Power management)(see page 76)Selecting the input signalSelect the signals input to the unit.Press or .INPUTMENUENTERUnitSwitches input every time the buttons are pressed.PC16:9[HDMI1] → [HDMI2] → [DIGITAL LINK] → [DVI-D] →[PC] → [VIDEO] → [USB] → [MEMORY VIEWER]*DIGITAL LINK is for TH-65SF2E only.[HDMI1]:HDMI 1 terminal, HDMI input[HDMI2]:HDMI 2 terminal, HDMI input[DIGITAL LINK]:DIGITAL LINK / LAN terminal, DIGITAL LINK input[DVI-D]:DVI-D IN terminal, DVI-D input[PC]:PC IN terminal, PC input[VIDEO]:AV IN terminal, composite video input[USB]:USB terminal, USB input[MEMORY VIEWER]:USB terminal, “Memory viewer” input
