Panasonic TH-65SF2U Operating Instructions Manual

Also see for TH-43SF2E: Operating Instructions - Basic Guide

Contents

Panasonic TH-65SF2U Operating Instructions Manual Manual pdf 54 page image

English54Image settingsSets the image displayed on the screen when thepower is turned on or no signal is input.[Image settings] - submenu screenImage settingsStartup image settingsNo signal image settings[Startup image settings]:Sets the image displayed when the power is turned on.[No signal image settings]:Sets the image displayed when there is no signal atthe selected input terminal.Conditions of the image that can be set in [Readuser image]● Image size: 1 920 x 1 080 only● jpg files / bmp files (except for the ones that cannotbe played back with USB media player (see page95))● jpg files (Applies only to a no-signal image of3.5 MB or less in file size.)File and folder names are displayed on the file list withconditions as below.‒ If a file or folder is placed directly under the rootdirectory of the USB device.● Up to 246 characters of file name (including theextension) are properly displayed.Note that the file list may disappear due to thedisplay time of the on-screen menu before theentire display of file names completely appears.● Up to 244 characters of folder name are properlydisplayed.• If the folder is placed hierarchically, the numberof characters displayed decreases by the numberof characters for the file path (folder information).‒ Only the files with file names described with ASCIIcharacters excluding control code are displayed.Note● [Picture] cannot be adjusted when setting the startupimage.● Only [Backlight] and [Colour temperature] can beadjusted when setting the no-signal image.● Images displayed for the startup image and no-signalimage may slightly differ from images confirmed onthe computer.■ [Startup image settings] /[No signal image settings]Operate [No signal image settings] in the same wayas [Startup image settings].[Startup image settings] - submenu screenStartup image settingsDisplay settingUser imageOnImage selectClear user imageRead user image[Display setting]Sets the image display when the power is turned on.[Off]: The function does not operate.[On]: Enables the function.Note● When no-signal image is displayed, the screenposition moves at certain intervals and images aredisplayed to alleviate burn-in on the LCD panel.● Shifts the display position regardless of the settingof [Wobbling] (see page 55).● When this function is operating, part of the screenmay appear to be missing.[Image select]Select the image to display.[Default image]: Panasonic logo (blue background)[User image]: Image registered by the userNote● Only when [Default image] is displayed, the logoautomatically rotates when displayed, accordingto the [Display orientation] (see page 65) setting([Landscape] / [Portrait]).● When [User image] is selected, the image does notrotate according to the [Display orientation] setting.Prepare an image of 1 920 x 1 080 aspect ratiocompatible with the installation direction.● [Default image] of [No signal image settings] is thePanasonic logo (black background).[Read user image]Register the image read from a USB memory device.[Read user image] - submenu screenRead user imageg_sample0_folder_sample..usb/picture/Select a no signal image.z_sample1sample.jpg2sample.jpg3sample.jpga_sample.jpgj_sample.jpgv_sample.jpg