|
111English7 Select [Execute] with andpress .Status Display name IP addressSF2-001SF2-002SF2-004SF2-005SF2-014SF2-006SF2-041SF2-009192.168. 0. 1192.168. 0. 2192.168. 0. 4192.168. 0. 25192.168. 0. 31192.168. 0. 7192.168. 0.124192.168. 0.211LAN data cloningExecuteWrite protect OffSelect displayNote● Data cannot be copied to the display for which[Write protect] is set to [On]. Set this to [On]to prevent [LAN data cloning] from beingperformed mistakenly when data copy is notnecessary.● Once [LAN data cloning] is performed, [Writeprotect] is set to [On].8 A confirmation window appears.Select [Execute] with and press.All data for the selected displays will be changed.Are you sure you want to execute?LAN data cloningExecute ReturnData copy to the display starts.LAN data cloningLAN data cloningDO NOT unplug your Display!Cloning in progress, please wait.9 The exit screen appears.The green mark on the list shows the data hasbeen copied successfully. The red mark showsfailure. If the red mark appears, check the LANcable connection or power status of the display ofthe copy destination.SF2-001SF2-002SF2-004SF2-005SF2-014SF2-006SF2-041SF2-009Status Display name IP address192.168. 0. 1192.168. 0. 2192.168. 0. 4192.168. 0. 25192.168. 0. 31192.168. 0. 7192.168. 0.124192.168. 0.211LAN data cloningCloning finished.If the data copy has finished, the messageappears on the display of the copy destination.Cloning finished.Please turn off the power.10 Switch the button> ( / ) on the display of thecopy destination to ( ) to turn thepower OFF.The copied content is applied to the display.● If the is locked,please disconnect the AC cord plug from thewall outlet.Note● If the data is copied with [POWER button lock] set to[On], this function operates after turning the poweroff, and the cannot be usedto turn the power on. In this case, remove the powerplug, wait sufficient time, and then connect the powerplug again to turn the power on.● [POWER button lock] function is only for TH-65SF2U, TH-55SF2U, TH-49SF2U and TH-43SF2U.
|
