Panasonic TH-65SF2U Operating Instructions Manual

Also see for TH-43SF2E: Operating Instructions - Basic Guide

Contents

Panasonic TH-65SF2U Operating Instructions Manual Manual pdf 55 page image

55EnglishNote● Set the input to something other than [USB] or[MEMORY VIEWER], and read the image.● One user image can be registered for [Startupimage settings] and [No signal image settings]respectively.● Do not turn the power off while reading the userimage.● The selected image is previewed on the [Read userimage] submenu screen.● When USB memory device is not connected to theUSB terminal, [Read user image] is greyed out andcannot be selected.● If starting to read the image while creating thepreview image, an access error will occur, and theimage may not be recognized as a image file.Confirm the preview image display, and then startreading process.● The displayed file names are restricted as follows.• Applicable extension: jpg, jpe, jpeg or bmp• The file name is not “.jpg”, “.jpe”, “.jpeg”, or“.bmp” which start with dot (.).● Depending on the OS setting, folders or files in theUSB memory invisible on your computer may bedisplayed on this unit.[Clear user image]Clears the image registered in [Read user image].[Startup image settings] - submenu screenStartup image settingsDisplay settingUser imageOnImage selectClear user imageRead user imageNote● When there is no [User image] that have been read,[Clear user image] is greyed out and cannot beselected.● When [Image select] is set to [User image],performing [Clear user image] will change thesetting of [Image select] to [Default image].WobblingAutomatically shifts the display image (thereforeunnoticeable to the eye) to prevent image retention ofsharper contour of image.Setting this to [On] moves the screen position at certainintervals and displays the images.Note● If [Multi display setting] is set to [On], this functiondoes not operate. (see page 56)● When this function is operating, part of the screenmay appear to be missing.No activity power offWhen this function is set to [Enable], the power is turnedoff (standby) automatically when there is no operation ofthe Display for 4 hours.Starting from 3 minutes before the turn off, theremaining time will be displayed.No activity power offPress any key to abort.3 minWhen the power is turned off due to this function, amessage [Last turn off due to ‘No activity power off’.]is displayed next time the power is turned on.When the image set in [No signal image settings] (seepage 54) is displayed, remaining time is not displayedeven when the power is going to be turned off in 3minutes. Instead, the image is displayed until thepower is turned off.Note● While the screensaver is running, this function isdisabled.OSD languageSelect your preferred language.Selectable languagesEnglish(UK)DeutschFrançaisItalianoEspañolENGLISH(US)中文 : Chinese日本語 : JapaneseРусский : Russian