Panasonic TH-65SF2U Operating Instructions Manual

Also see for TH-43SF2E: Operating Instructions - Basic Guide

Contents

Panasonic TH-65SF2U Operating Instructions Manual Manual pdf 8 page image

English8Safety PrecautionsWARNING■ SetupThis LCD Display is for use only with the followingoptional accessories.Use with any other type of optional accessories maycause instability which could result in the possibilityof injury.Securely install the pedestal, an optional accessory. Askan authorized dealer for installation.• Pedestal65-inch model 55-inch modelTY-ST55PE949-inch model 43-inch modelTY-ST43PE9• Digital Interface BoxET-YFB100• DIGITAL LINK SwitcherET-YFB200• Early Warning SoftwareET-SWA100 series*1• Video Wall ManagerTY-VUK10*2*1: Suffix of the part number may differ depending onthe license type.*2: Supports Ver1.7 or later.Note● The part number of the optional accessories aresubject to change without notice.When installing the pedestal, read the operatinginstructions supplied with it carefully and install properly.Also, always use the overturn prevention accessories.We are not responsible for any product damage, etc.caused by failures in the installation environment forthe pedestal or wall-hanging bracket even during thewarranty period.Small parts can present choking hazard if accidentallyswallowed. Keep small parts away from young children.Discard unneeded small parts and other objects,including packaging materials and plastic bags/sheets toprevent them from being played with by young children,creating the potential risk of suffocation.Do not place the Display on sloped or unstablesurfaces, and ensure that the Display does not hangover the edge of the base.• The Display may fall off or tip over.Install this unit at a location with minimal vibrationand which can support the weight of the unit.• Dropping or falling of the unit may cause injury ormalfunction.Do not place any objects on top of the Display.Transport only in upright position!• Transporting the unit with its liquid crystal panelfacing upright or downward may cause damage to theinternal circuitry.Ventilation should not be impeded by coveringthe ventilation openings with items such asnewspapers, table cloths and curtains.For sufficient ventilation, see page 11.Caution - For use only with UL Listed Wall MountBracket with minimum weight/load 29.8 (65.7 lbs).When installing the Display vertically, be sure thatthe Power Indicator comes to the upper side.Power indicator• Heat is generated and it may cause fire or damage tothe Display.Cautions for Wall or Pedestal Installation• The installation should be performed by an installationprofessional. Installing the Display incorrectly maylead to an accident that results in death or seriousinjury. Use the optional Pedestal. (see page 8)• When installing on a wall, a wall hanging bracket thatconforms to VESA standards must be used.65-inch model 55-inch model49-inch model 43-inch modelVESA 400 × 400(see page 11)• Before installation, be sure to check if the mountinglocation has enough strength to support the weightof the LCD display and the wall hanging bracket foranti drop.• If you terminate the use of the Display on the Wall orPedestal, ask a professional to remove the Display assoon as possible.• When mounting the Display on the wall, prevent themounting screws and power cable from contactingmetal objects inside the wall. An electric shock mayoccur if they contact metal objects inside the wall.Do not place the display where it may be affected bysalt or corrosive gas.• Doing so may cause the display to fall due tocorrosion. Also, the unit may malfunction.Do not install the product to a place where theproduct is exposed to direct sunlight.• If the unit is exposed to direct sunlight even indoors,the temperature rise of the liquid crystal panel maycause malfunction.