NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 52 page image

E – 45List of Menu Items Available on Link Mode9.Function Link modeMenu Source Select LAdjust(Source) Picture LWhite Balance LImage Pixel Adjust LPosition NAspect Ratio LResolution LOverscan LVideo Filter LBlanking NVideo Adj NOption Adj NLens Memory NSignal Type NSwitcher NRef Adj Keystone NLamp NRef. White Bal. NFactory Default NProjector Options Timer LMenu MSetup NLink Mode MSwitcher Control NHelp MTest Pattern NDirect Button LENS SHIFT Projector IRemote Control NFOUCUS Projector IRemote Control IZOOM Projector IRemote Control IMENU Projector L (*1)Remote Control L (*1)POWER Projector L (*2)POWER ON Remote Control L (*2)POWER OFF Remote Control L (*2)INPUT Remote Control L (*1)MUTE(PICTURE) Remote Control L (*1)MUTE(SOUND) Remote Control L (*1)MUTE(OSD) Remote Control L (*1)AUTO Remote Control N (*3)TEST Remote Control NPC Control AllEach letter used in the above note means the followingLetter Master projector Slave projector (s)L valid linkedN invalid invalidM valid invalidI independently adjustable independently adjustableSee the table below for available functions in the digital link mode and the analog link mode.See the table below for available functions in the digital link mode (SX6000 only) and the analog link mode.* The digital signals available in the Link mode are the VESA compatible-signals except interlaced signals of VGA@60Hz to SXGA@75Hz.* The VESA compatible signals that can connect to the master projector as analog input and connect to the slave projector as digital output areinterlaced signals of SVGA@85Hz, XGA@60Hz, XGA@70Hz, XGA@75Hz, XGA@85Hz, SXGA@60Hz and SXGA@75Hz.* Video (NTSC, PAL, SECAM), YCbCr(50Hz/60Hz), 480p, 720p, SDI (525/625) signals can be supported.Use a commercially available distribution amplifier to connect each projector when connecting the other signals.No restriction.Comply with theabove specifica-tions.*1 Each adjustment is not possible on theslave projector in the link mode.*2 Each adjustment is possible on the slaveprojektor in the link mode.*3 Auto Adjust in Setup is not available.

/ 54

Related manuals for NEC MultiSync SX4000