NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 16 page image

E – 9Lens Shift Adjustable RangeLens Shift Adjustable Range for Desktop and Ceiling Mount ApplicationThe diagram below shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown using the normalprojection position as a starting point.Maximum Possible Range for TL-1Z/1ZH, TL-2Z and TL-4ZParenthesized values for the ceiling mount applicationUp: 0.41 V (0.24 V) Right: 0.28 H (0.19 H)Down: 0.24 V (0.41 V) Left: 0.19 H (0.28 H)(H: width of projected image, V: height of projected image)Desktop/ FrontVerticalNormal positionMax. 0.41V1V0.19H 0.28H0.41V0.24V(V)(H)Normal ProjectionpositionCeiling/ FrontVertical Normal positionMax. 0.41V1V(H)(V)0.41V0.24VNormal Projectionposition0.19H0.28HExample for StackScreen centerFixed Lens TL-08SFMaximum Possible Range for TL-08SFUp: 0.09 V Right: 0.06 HDown: 0.09 V Left: 0.06 H(H: width of projected image, V: height of projected image)NOTE: To reduce the distortion of an image, it is recommended that the projector is horizontally positioned at a projection angle of 0 degree.0.06H 0.06H0.09V0.09V(H)(V)Normal ProjectionpositionNormal positionMax. 0.09V1V