NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 28 page image

E – 21REMOTE 1 ConnectorPin Configuration of Optional CTL-6010 CableREMOTE 1 connectorof the Switcher mini D-sub 15 pin (female)REMOTE 1 connector ofthe Projector mini D-sub15 pin (female)Shield (frame ground)Pins without a number are open.5 14 2310111213141569 78This connector is used for either connecting the ISS-6020/ISS-6020G Switcher or a thirdparty external control device. When the Switcher is used, connect it with the optional controlcable (15-15 pin; 50 ft./16m; CTL-6010) to this connector.When using with the Switcher ISS-6020/ISS-6020G, connect No. 1,2,6,7,9 and15 pins ofthe projector to the same No. pins of the switcher as shown below.When used with the Switcher.Pin No. FUNCTION1, 2, 6 and 7 Sending and receiving data when the Switcher is used.9 Identifying the Projector15 Ground3, 8,11 and 12 Used inside the Projector. Normally set to OPEN.1 12215 15669977