NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 20 page image

E – 13Set up the projector1. Turn on the projector2. Select your type of projection:Desktop front, ceiling rear, desktop rear, and ceiling front.3. Display the test pattern by pressing the TEST button on the re-mote control or using the menu.TEST4. Adjust the image position and the image size.(1) Press and hold the CTL button and press the POSITION button to displaythe Lens Shift adjustment screen.Use the Select button on the remote control or the LENS SHIFT button onthe projector cabinet to move the image horizontally and vertically.To close the the Lens Shift adjustment screen, press the CANCEL button.See page E-9 for “Lens Shift Adjustable Range”.POSITIONLENSCTL+-(2) Press and hold the CTL and press the ZOOM + or - button to adjust theimage size. You can also adjust the image size by using the ZOOM + or -button on the projector cabinet.MAGNIFY+-+-FOCUS ZOOMLENSCTL(3) Press and hold the CTL button and press the FOCUS + or - button toobtain the best focus. You can also adjust the focus by using the FOCUS+ or - button on the projector cabinet.MAGNIFY+-+-FOCUS ZOOMLENSCTL