NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 34 page image

E – 27A List of Direct Key CombinationsCTL+ INPUT (1-10) Switches to any selected signal found in the Entry List.To enable this combination, you must first assign specific remote keys for direct inputselection in the Entry Edit window.CTL+ ENTER (While displaying Entry list) Displays the Entry Edit Command window.CTL+ MUTE PICTURE(SHUTTER) Blocks all Projector Light Output.CTL+CANCEL Returns to the previous menu without closing the slidebar or dialog.CTL+ UNDO Clears all menus or adjustment/setting screens. All adjustments are saved automatically.CTL+ / / / Moves the slidebar or dialog box horizontally or vertically.While using zoom on remote control: Displays the magnifying glass icon.CTL+ (BS) Deletes one letter or numeral in the entry screen.CTL+MUTE (OSD) Turns off the on-screen display forcefully.INPUT(1-10) in SW Level mode Displays the Select switcher Input Slot window.NOTE: This feature is available for SW 2 Level mode only.When the SW 1 Level mode is selected, pressing INPUT key switches to the correspondingslot without displaying the Select Slot window.CTL+ MENU (ADDRESS) Displays the remote ID entry window.CTL+ IMAGE (PROJECTOR) Sequentially selects the Projector Options sub menu.CTL+ POSITION (LENS) Displays the Lens Shift control window.CTL+ KEYSTONE (R) Turns on red. Available only when the projector is in the test pattern mode.CTL+ AMPLITUDE (G) Turns on green. Available only when the projector is in the test pattern mode.CTL+ ENTRY LIST (B) Turns on blue. Available only when the projector is in the test pattern mode.CTL+ MAGNIFY (ZOOM) Zooms the lens in and outCTL+ (FOCUS) Adjusts the lens focus.