NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 13 page image

E – 6OFF+-PICTUREADJUSTABC DEF GHIJKL MNO PQRSTU,. UNDO CANCELTESTPICTUREKEYSTONE AMPLITUDE ENTRYLISTSOUND OSDMUTEMAGNIFYHELPINFO.POSITION AUTOPIXELVWX YZ/WHITE BAL.IMAGEONPOWERMENUENTER1 2 34 5 6708 9ADDRESSPROJECTORR G BLENSSHUTTERBS+-+-FOCUS ZOOMCTLLENS2567910121317202122242625231918161514118431Remote Control1 POWER ONPress to turn on the projector. The POWER indicator lights up green.2 POWER OFFPress and hold this button for a minimum of two seconds to turn off theprojector.3 MENUPress to display the main menu.While pressing and holding CTL, press this button to display the Re-mote Control ID dialog box to specify the remote control ID.4 ENTERExecutes the menu selection and activates items selected from the menu.When the slidebar or dialog box is diplayed:Pressing this button confirms adjustments/setting and returns to theprevious menu display.5 SELECT (Up/Down/Left/Right)When pressed together, the CTL and buttons work as a Back Spacekey in the entry screen.Pressing and holding CTL, then this button moves the menu, slidebaror dialog box.6 ADJUST WHITE BALPress to display the Color adjustment screen. Pressing this button se-quentially selects "Color Temperature" → "White Balance - Brightness"→ "White Balance - Contrast" → "Signal Level" → "Ref.White Bal" →"Switcher-Gain".7 ADJUST PICTUREPress to display the Picture adjustment screen. Pressing this buttonsequentially selects "Brightness" → "Contrast" → "Saturation" → "Color"→ "Hue" → "Sharpness" → "V-Aperture" → "Gamma Correction".8 IMAGE/PROJECTORPress to display the Image Option screen. Pressing this button sequen-tially selects "Pixel Adjust" → "Position" → "Aspect Ratio" → "Resolu-tion" → "Overscan" → "Video Filter" → "Blanking".While pressing and holding CTL, pressing this button rotates "On/OffTimer" → "Sleep Timer" → "Menu" → "Setup" → "Link Mode" →"Switcher Control".9 INPUTUse to select an input, to name a signal, or to enter a passcode duringinput registration.1--INPUT 1 for RGBHV/Y, Cb/Pb, Cr/Pr2--INPUT 2 for RGBHV/Y, Cb/Pb, Cr/Pr3--INPUT 3 for RGB4--INPUT 4 for Y, Cb/Pb, Cr/Pr5--INPUT 5 for VIDEO 16--INPUT 6 for VIDEO 27--INPUT 7 for S-VIDEO 18--INPUT 8 for S-VIDEO 29--INPUT 9 for RGB DIGITAL input0--INPUT 0 for SDI input on the optional SDI board10 UNDOPress to return the adjustments and settings to the previous condition.While pressing and holding CTL, pressing this button clears all the menusor ajustment/setting screen. At this time the adjustments/settings arestored in memory.11 CANCELPress to exit the menu.Press this button with CTL to return to the previous menu while themenus appear. This feature allows you to adjust several items concur-rently.12 INFODisplays the "Source Information" or "Projector Information" window.This button toggles between these two windows.13 TESTPress to display the test pattern. Pressing this button sequentially se-lects five test patterns.14 HELPProvides online help.15 PIXELDisplays the Pixel Adjust screen to adjust the clock and phase.16 AUTO (RGB only)Press to adjust Position-H/V and Pixel Clock for an optimal picture.NOTE: The Pixel Phase is not available.