NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 33 page image

E – 26Customizing Basic/Custom MenuThe Basic/Custom menu can be customized to meet your requirements.Selecting a menu item from the "Basic/Custom Menu Edit" list, allowsyou to custom tailor the menu items to your needs.1. Select "Basic/Custom Menu Edit" to display the "Basic/Custom MenuEdit" screen.2. Use the or button to highlight your selection and press the Enterbutton to place a check mark next to an option. This action enablesthat feature.Press the Enter button again to clear the check box.If you select an item with a solid triangle and press the Enter buttonon the remote control or the projector cabinet, you can enable all theitems within that submenu.Also you can turn on an item within the submenu without placing acheck mark on the main menu item.NOTE: Up to 12 main menu items (within Basic/Custom Menu Edit, not in-cluding submenu items) can be selected.3. In order for the changes to take effect, use the or button on theremote control or the projector cabinet to highlight "OK", then pressthe Enter button. To cancel the changes, use the or buttons tohighlight "Cancel" and press the "Enter" button.To return to the factory default, select "Reset" then press the "Enter"button.The default Basic/Custom Menu items are:Source Select (RGB1/2/3, Component (YCbCr), Video1/2, S-Video1/2, DVI digital, and SDI), Brightness, Contrast, Pixel Adjust and Po-sition.NOTE: Once you have selected OK on the Basic/Custom Menu Edit screen,you cannot cancel the changes on the Menu screen. However, you can re-edit the menu items over again as described in the steps above.NOTE: If the "Advanced Menu" item has been selected on the Menu mode,you get the "Confirmation Change Menu" upon completion of "Basic/CustomMenu" editing. In this case, selecting "Yes" then "Enter" will close all the menusand apply the changes from the Advanced menu to the Basic/Custom Menu.If you select "No" then "Enter" functions, then all menu items will return tothe Advanced menu, but your changes will still be available within the "Basic/Custom Menu" selection. To display the previously tailored Basic/CustomMenu, select "Basic/Custom Menu" from the "Menu Mode".An item "To Advanced Menu" will be added to the bottom of the Ba-sic/ Custom Menu.Selecting this item and pressing the "Enter" button will display the"Advanced Menu" features.