NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 50 page image

E – 437. Optional AccessoriesLens TL-08SF (Short Focal Lens 0.84) : 10kgTL-1Z/1ZH (Zoom Lens 1.5 - 2.5:1) : 5.5kgTL-2Z (Zoom Lens 2.5 - 4.0:1) : 4.5kgTL-4Z (Zoom Lens 4.0 - 7.0:1) : 4.5kgInterface Board XT SDI BOARDSX HDSDIX DIGITAL RGB BOARDCeiling Mount Kit XT CMKITSwitcher ISS-6020 Video/RGB SwitcherThree Interface boards are optionally available.XT SDI BOARDThis board accepts the input of non-compressed signal sources such as commercial type digital VTR(e.g., D1/D5-VCR) compatible with digitalserial component signals (of the SMPTE 259M-C standard) and provides a high quality image without quantization noise. Note that the BNC cableused with the SDI connector should be Belden 8281 cable, or 3C-2V equivalent cable or better.Packaged items: SDI board (1), shield case (1), connector cable (1), and installation manual (1)SX HDSDI BoardThis board accepts the input of non-compressed signal sources such as commercial type digital VCR (D5-VCR) compatible with digital serialcomponent signals (of the SMPTE 292M standard) and provides a high quality image without quantization noise. This board accepts the followingimage formats.System1920x1035/60/2:11920x1080/60/2:11280x720/60/1:11920x1080/24(sF)Number of samplesof active 1 line1920192012801920Number of activelines in 1 frame103510807201080Frame rate (Hz)30306024Scanning format2:1Interlace2:1InterlaceProgressiveProgressiveSamplingfrequency (MHz)74.2574.2574.2574.25Total number ofsamples in 1 line (dot)2200220016502750Total number oflines in 1 frame112511257501125Note that the BNC cable used with the HDSDI connector should be 5C-FB equivalent cable or better.Packaged items: HDSDI board (1), shield case (1), connector cable (2), flat cable (1), set screw for shield case (2) and installationmanual (1)X DIGITAL RGB BOARDConsult your dealer for the optional X DIGITAL RGB BOARD.