NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 17 page image

E – 10Pulling Out the HandlesPull out the handle until it clicks into place.Retracting the Handles1) Push the lever to unlock and 2) retract the handle.Selecting A LocationThe further your projector is from the screen or wall, the larger the im-age. The minimum size the image can be projected is 80" (2 m) mea-sured diagonally. The largest the image can be is 500" (12.7 m).WARNING• Only use your projector on a solid, level surface. If the projector fallsto the ground, you can be injured and the projector severely dam-aged.• Do not use the projector where temperatures vary greatly. The pro-jector must be used at temperatures between 40 degrees F (5 de-gree C) and 95 degrees F (35 degree C).• Do not expose the projector to moisture, dust, or smoke. This willdegrade the screen image.• Ensure that you have adequate ventilation around your projector forproper heat dissipation. Do not cover the vents on the projector cabi-net.80" 100"200"300"400"500"Moving The ProjectorAlways carry your projector by the handle. Ensure that the power cordand any other cables connecting to video sources are disconnectedbefore moving the projector. When moving the projector or when it isnot in use, cover the lens with the lens cap.