NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 10 page image

E – 3LENS SHIFT ZOOM MENU SELECT- +ENTERONINDICATOR POWERSTATUSON/OFFOFFCANCELFOCUS11 10 9 8 7 5 4 21361. Power ButtonPress to turn the projector on when the projector is in the standby con-dition (Main Power switch must be on and the POWER indicator lit am-ber). Press and hold for 2 seconds to turn off the projector.2. Power IndicatorWhen this indicator is green, the projector is on; when the indicator isamber, it is in standby mode.NOTE: After the projector is turned off, the indiacator "--" flashes for three min-utes to show that the cooling fan is working.Do not turn off the main power during that time. After "--" stops flashing, thePOWER indicator will change to a steady amber glow and the projector will be inthe stand-by mode.3. Status IndicatorWhen On Timer is set and the projector is in the standby mode, theStatus indicator flashes green to show that On Timer program is active.4. Two Digit DisplayDuring normal operation the current projector ID (address) is shown inthis two digit display. In the event of an error, a projector error code willbe displayed. The display can be turned off using the ON/OFF Switch tothe left hand side.5. Enter ButtonExecutes your menu selection and activates items selected from themenu. When the slidebar or dialog box is diplayed:Pressing this button confirms adjustments/setting and returns to theprevious menu display.6. Cancel ButtonPress this button to exit the menu. Press this button to return the adjust-ments to the last condition while you are in the adjustment or settingmenu.7. Select (Up/Down/Left/Right) ButtonUp/Down: Use these buttons to select the menu of the item you wish toadjust.Left/Right: Use these buttons to change the level of a selected menuitem.8. Menu ButtonDisplays the main menu for operation.9. Zoom ButtonZoom the lens in and out.10. Focus ButtonAdjust the lens focus.11. Lens Shift ButtonAdjust the lens offset by shifting the projected image position horizon-tally and vertically.Remote sensorControls