NEC MultiSync SX4000 User Manual

Contents

NEC MultiSync SX4000 User Manual Manual pdf 44 page image

E – 375. To enable your setting, select Active on the Execute Switch.6. Select OK and press the ENTER button on the remote control to completethe setting.NOTE: When On Timer is set and the projector is in the standby mode, theStatus indicator flashes green to show that On Timer program is active. Theprojector must be in stand-by mode at the time of turning on. The presetpower-on time will be void if the cooling fan is working or an error occurs.Unplugging the projector cancels your 1 Week programs regardless ofwhether the program was executed or not. However, your Every Week pro-gram will not be cancelled even if you unplug the projector.Sleep Timer1. Select your desired time between 30 minutes and 2 hours in 30 minuteincrements.2. Select Set and press the ENTER button on the remote control.3. The remaining time starts counting down.4. The projector will turn off after the countdown is complete.Menu[Page 1]Allows you to set preferences for the on-screen menu.Press "OK" to save your changes for all the features.Menu Mode:This feature allows you to select two menu modes: Advanced Menuand Basic/Custom Menu.Advanced Menu .......... This is the menu that contains all the available menusand commands.Basic/Custom Menu .... This is the menu that you can customize using theBasic/Custom Menu Edit to fit your needs.The factory default Basic/Custom menu includes:Source Select (RGB1/2/3, Component(YCbCr), Video1/2, S-Video1/2, RGB (Digital), and SDI), Brightness, Contrast, Pixel Adjust andPosition. See page E-26 for instructions about how to customize theBasic/Custom Menu.Language:You can choose one of seven languages for on-screen instructions.The options are: English, German, French, Italian, Spanish, Swedishand Japanese.Menu Display Time :This option allows you to select how long the projector waits after thelast touch of a button to turn off the menu.The preset choices are "Manual", "Auto 5 sec", "Auto 10 sec", and "Auto30 sec". The "Manual" is the factory preset.Manual ......... The menu can be turned off manually.Auto 5 sec .... The menu will automatically be turned off in 5 seconds if nobuttons are pressed within 5 seconds.Auto 10 sec .. The menu will automatically be turned off in 10 seconds if nobuttons are pressed within 10 seconds.Auto 30 sec .. The menu will automatically be turned off in 30 seconds if nobuttons are pressed within 30 seconds.[Page 2]Display Select:You can choose the desired status information to be displayed on thescreen. The desired status information will be displayed each time youswitch between sources.Date Format:Eight display formats can be selected. This date format sets the currentdate that appears on the upper left corner of the screen.Date, Time Preset:Setting the Current Date and TimeYou can set the current time, month, date, and year.1. Type in date.Enter month, date and year in this order using INPUT buttons on the re-mote control.Month and date must be entered in two digits. For example, to display"February", press "0" and "2".2. Type in time.Time is expressed in the 24-hour format. For example, 6:00 p.m. is en-tered as 18:00.3. Select "OK" and press ENTER.Closing the window allows the clock to start.The current year, month, date and time are displayed on the top of thescreen.NOTE: The projector has a built-in clock. The clock will keep working forabout 3 days after the main power is turned off. If the main power is off for3 days or more, the built-in clock will be reset. If the built-in clock is reset,set the date and time again. The built-in clock will not reset while in thestandby condition.