3-18 Configuring Your SystemAdaptec SCSI Utility Configuration SettingsThe following keys are active for all Adaptec SCSI Utility screens:Key ActionArrows Up and down arrows move from one parameter to another within a screen.ENTER Displays options for a configurable parameter. Selects an option.ESC Moves back to previous screen or parameter or EXIT if at the Main menu.F5 Switches between color and monochrome.F6 Resets to host adapter defaults.The following table shows the normal settings for the Adaptec SCSI Utility andprovides a place for you to record any changes you make to these settings.Table 3-1. SCSISelect Utility Setup ConfigurationsOPTIONRECOMMENDED SETTINGOR DISPLAY ONLYYOURCONFIGURATIONSCSI Bus Interface DefinitionsSCSI Controller ID 7SCSI Controller Parity EnabledSCSI Controller Termination EnabledAdditional OptionsBoot Device Configuration Press ENTER for menuMaster SCSI Controller AIC-7902 at Slot 0004:07:00SCSI Device Configuration Press ENTER for menuSync Transfer Rate (MB/Sec) 320Packetized YesQAS YesInitiate Wide Negotiation YesEnable Disconnection YesSend Start Unit Command YesBIOS Multiple LUN Support No 1Include in BIOS Scan Yes 1Advanced Configuration Press ENTER for menu.Reset SCSI Bus at IC Initialization Enabled1 No effect if BIOS is disabled.
