NEC Express5800/120Rf-2 User Manual

Also see for Express5800/120Rf-2: Product guide Release note

Contents

NEC Express5800/120Rf-2 User Manual Manual pdf 177 page image

Problem Solving 5-13Bootable CD-ROM Is Not DetectedCheck the following:! Is the BIOS set to allow the CD-ROM to be the first bootable device? Check yourBIOS Setup (F2) configuration.Problems with the NetworkDiagnostics pass, but the connection fails:! Make sure the network cable is securely attached.The controller stopped working when an add-in adapter was installed:! Make sure the cable is connected to the port from the onboard network controller.! Make sure the other adapter supports shared interrupts.! Try reseating the add-in adapter.The add-in adapter stopped working without apparent cause.! Try reseating the adapter first; then try a different slot if necessary.! The network driver files may be corrupt or deleted. Delete and then reinstall thedrivers.! Run the diagnostics.Plug and Play Installation TipsCertain drivers may require interrupts that are not shared with other PCI drivers. TheBIOS Setup Utility can be used to adjust the interrupt numbers for PCI devices. Forcertain drivers, it may be necessary to alter settings so that interrupts are not shared.