Configuring Your System 3-13Server Menu (Continued)FeatureChoices or DisplayOnlyDescription Your SettingBootMonitoringPolicyRetry 3 TimesRetry Service BootAlways RetestThis item indicates the processing atthe occurrence of timeout during bootmonitoring.If [Retry 3 times] is selected, the systemis reset after the occurrence of timeoutand OS boot is retried up to three times.The failure in the third boot causes theboot to be tried from the servicepartition*.If [Retry Service Boot] is selected, thesystem is reset after the occurrence oftimeout and OS boot is retried up tothree times. Then the boot is tried fromthe service partition for three times. Thesystem halts if the system fails to bootfrom the service partition.If [Always Reset] is selected, thesystem is reset after the occurrence oftimeout and OS boot is retriedrepeatedly.* If no service partition exists in thesystem, BIOS continues to bootupfrom the system partition.System Management SubmenuFeatureChoices orDisplayOnlyDescription Your SettingBoard Part Number – Indicates the part number of motherboard. (View only)Board Serial Number – Indicates the serial number of motherboard. (View only)System Part Number – Indicates the system part number. (Viewonly)System Serial Number – Indicates the serial number of system.(View only)Chassis Part Number – Indicates the part number of chassis.(View only)Chassis Serial Number – Indicates the serial number of chassis.(View only)BIOS Version – Indicates BIOS version number. (Viewonly)BMC Device ID – Indicates the device ID of BMC(Baseboard Management Controller.(View only)BMC FirmwareRevision– Indicates BMC (BaseboardManagement Controller) firmwarerevision number. (View only)BMC Device Revision – Indicates BMC (BaseboardManagement Controller) device revisionnumber. (View only)PIA Revision – Indicates the revision of PIA (PlatformInformation Area). (View only)SDR Revision – Indicates the revision of SDR (SensorData Record). (View only)HSBP Revision – Indicates HSBP (Hot-Swap Backplane)revision number. (View only)
