3-12 Configuring Your SystemServer MenuFeatureChoices or DisplayOnlyDescription Your SettingManagement Select SubmenuConsoleRedirectionSelect SubmenuEvent LogConfigurationSelect SubmenuAssert NMI onPERRDisabledEnabledSets support of PCI PERR.Assert NMI onSERRDisabledEnabledSets support of PCI SERR.FRB-2 Policy Disable BSPDo not Disable BSPRetry 3 TimesDisable FRB2 TimerSet this item to "Disable BSP."BMC IRQ DisabledIRQ 5IRQ 11Sets the BMC IRQ.AC-Link Stays OffLast StatePower OnSets the AC-LINK feature.Determines the mode of operation if apower loss occurs.TemperatureSensorDisabledEnabledEnables or disables temperature sensormonitoring feature.POST ErrorPauseDisabledEnabledSpecifies whether the system waits foruser intervention on critical POSTerrors.If no keyboard is connected to thesystem, this option is ignored and thesystem always continues.Platform EventFilteringDisabledEnabledDisable or enable the event reportfunction of Baseboard ManagementController (BMC).BootMonitoringDisabled5 minutes10 minutes15 minutes20 minutes25 minutes30 minutes35 minutes40 minutes45 minutes50 minutes55 minutes60 minutesIndicates whether the boot monitoringfunction is enabled or disabled and thetimer value on booting.To use this function, install ESMPROAgent. Do not use this function if thesystem is booted from OS withoutinstallation of ESMPRO Agent or CD-ROM. Set this item to "Disabled" ifARCServe uses the Disaster RecoveryOption.
