3-6 Configuring Your SystemPrimary and Secondary Master and Slave IDE SubmenusFeatureChoices orDisplay Only Description Your SettingType AutoNoneSelect Auto if a device isattached to the IDE channel.Multi-Sector Transfer Disabled2 Sectors4 Sectors8 Sectors16 SectorsSpecifies the number ofsectors that are transferredper block during multiplesector transfers. This field isinformational only, for TypeAuto.PI0 Mode StandardFPIO 1FPIO 2FPIO 3FPIO 4FPIO 3 / DMA 1FPIO 4 / DMA 2Select the method for movingdata to/from the drive. Thisfield is informational only, forType Auto. This field isupdated to display only themodes supported by theattached device.Ultra DMA DisabledEnabledSelects the Ultra DMA modeused for moving data to/fromthe drive. This field isinformative only for TypeAuto.Processor Settings SubmenuFeatureChoices orDisplay Only Description Your SettingProcessor POSTSpeed SettingInformation Only Displays measured processorspeed.Processor Retest DisabledEnabledIf yes, BIOS will clearhistorical processor statusand retest all processors onthe next boot. After retesting,BIOS resets this optionautomatically to “Disable”.Hyper-Threading DisabledEnabledSpecifies whether Hyper-Threading Technology isenabled or disabled.Processor 1 CPUID CPUIDNot InstalledDisabledReports CPUID for Processor1, if present. If empty, reportsVacant. If disabled by BMC,reports Disabled.Processor 1 L2 CacheSizeInformation Only Displays L2 Cache Size forProcessor 1.Processor 2 CPUID CPUID (OFXX)Not InstalledDisabledReports CPUID for Processor2, if present. If empty, reportsVacant. If disabled by BMC,reports Disabled.Processor 2 L2 CacheSizeInformation Only Displays L2 Cache Size forProcessor 2.
