Lenovo ThinkSystem SD650 Manual

Also see for 5468: Setup guide Quick start

This message is for the use case when an implementation has detected a Power Supply has been added.Severity: InfoServiceable: NoAutomatically notify Support: NoAlert Category: System - OtherSNMP Trap ID: 22CIM Prefix: PLAT CIM ID: 0084User Action:Information only; no action is required• FQXSPPW0002L: [PowerSupplyElementName] has Failed.This message is for the use case when an implementation has detected a Power Supply has failed.Severity: ErrorServiceable: YesAutomatically notify Support: YesAlert Category: Critical - PowerSNMP Trap ID: 4CIM Prefix: PLAT CIM ID: 0086User Action:Need power team to input• FQXSPPW0006I: [PowerSupplyElementName] has lost input.This message is for the use case when an implementation has detected a Power Supply that has inputthat has been lost.Severity: WarningServiceable: NoAutomatically notify Support: NoAlert Category: Warning - PowerSNMP Trap ID:CIM Prefix: PLAT CIM ID: 0100User Action:Need power team to input• FQXSPPW0008I: [SensorElementName] has been turned off.This message is for the use case when an implementation has detected a Power Unit that has beenDisabled.Severity: InfoServiceable: NoAutomatically notify Support: NoAlert Category: System - Power OffSNMP Trap ID: 23CIM Prefix: PLAT CIM ID: 0106User Action:Information only; no action is required• FQXSPPW0009I: [PowerSupplyElementName] has been Power Cycled.92 ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference