Lenovo ThinkSystem SD650 Manual

Also see for 5468: Setup guide Quick start

• FQXSPSE4029I: Security: Userid: [arg1] had [arg2] login failures from SNMP client at IP address[arg3].This message is for the use case where a user has failed to access a Management Controller from SNMP.Severity: InfoServiceable: NoAutomatically notify Support: NoAlert Category: System - Remote LoginSNMP Trap ID: 30CIM Prefix: IMM CIM ID: 0154User Action:Information only; no action is required• FQXSPSE4030I: Security: Userid: [arg1] had [arg2] login failures from IPMI serial client.This message is for the use case where a user has failed to log in to a Management Controller from IPMIserial clientSeverity: InfoServiceable: NoAutomatically notify Support: NoAlert Category: System - Remote LoginSNMP Trap ID: 30CIM Prefix: IMM CIM ID: 0155User Action:Information only; no action is required• FQXSPSE4031I: Remote Login Successful. Login ID: [arg1] from [arg2] serial interface.This message is for the use case where a user successfully logs in to a Management Controller.Severity: InfoServiceable: NoAutomatically notify Support: NoAlert Category: System - Remote LoginSNMP Trap ID: 30CIM Prefix: IMM CIM ID: 0156User Action:Information only; no action is required• FQXSPSE4032I: Login ID: [arg1] from [arg2] at IP address [arg3] has logged off.This message is for the use case where a user has logged off of a Management Controller.Severity: InfoServiceable: NoAutomatically notify Support: NoAlert Category: System - Remote LoginSNMP Trap ID: 30CIM Prefix: IMM CIM ID: 0157User Action:Information only; no action is required• FQXSPSE4033I: Login ID: [arg1] from [arg2] at IP address [arg3] has been logged off.Chapter 2. XClarity Controller events 109