Lenovo ThinkSystem SD650 Manual

Also see for 5468: Setup guide Quick start

5. If the problem persists, perform AC reset or virtual reseat.Note: When performing AC reset, after powering off AC, wait several seconds before powering onAC. After AC power is restored, power on the host system.6. If the problem persists, contact technical support.• FQXPMOS0003K: Failed to copy Windows boot files to targetSeverity: WarningUser Action:1. Ensure proper operation of the virtual USB connection.2. Restart BMC via supported method and reboot the system.3. Reflash BMC firmware.4. Retry OS deployment.5. Perform AC reset or virtual reseat.Note: When performing AC reset, after powering off AC, wait several seconds before powering onAC. After AC power is restored, power on the host system.6. If the problem persists, contact technical support.• FQXPMOS0004K: BMC Communication Failed: EMMC2USB Mount Failure.Severity: WarningUser Action:1. Ensure proper operation of the virtual USB connection.2. Restart BMC via supported method and reboot the system.3. Reflash BMC firmware.4. Retry OS deployment.5. Perform AC reset or virtual reseat.Note: When performing AC reset, after powering off AC, wait several seconds before powering onAC. After AC power is restored, power on the host system.6. If the problem persists, contact technical support.• FQXPMOS0005K: BMC communication failed: DRIVER Mount Failure.Severity: WarningUser Action:1. Ensure proper operation of the virtual USB connection.2. Restart BMC via supported method and reboot the system.3. Reflash BMC firmware.4. Retry OS deployment.5. Perform AC reset or virtual reseat.Note: When performing AC reset, after powering off AC, wait several seconds before powering onAC. After AC power is restored, power on the host system.6. If the problem persists, contact technical support.• FQXPMOS0006K: BMC communication succeeded. Volume Name MISMATCHED.Chapter 4. XClarity Provisioning Manager events 195