Lenovo ThinkSystem SD650 Manual

Also see for 5468: Setup guide Quick start

SeverityCriticalServiceableAutomatically notify supportUser ActionComplete the following steps:1. Check if PSU power cord is plugged.2. Reseat components in the following order, continue down the list if OV fault is not de-asserted:Power supply, Mid-plane, All Nodes.3. If PSU 12V AUX Fault is still asserted, replace PSU.• 65 : PS3_EPOW_AssertAC power provided to the indicated power supply is lostSeverityNon-RecoverableServiceableAutomatically notify supportUser ActionComplete the following steps:1. Make sure PSU power cord is properly plugged in. Check if AC power is stable.• 66 : PS3_Throttle_AssertPower supply is having over-current condition.SeverityCriticalServiceableAutomatically notify supportUser ActionComplete the following steps:1. Make sure PSU power cord is properly plugged in.2. Un-install node one by one to identify if any of the node is causing the OC condition.3. If Throttle is still asserted when all nodes are removed from chassis, do the following: Unplugpower supplies power cord and removed all power supplies from chassis. Plug power cord backinto power supply while power supply is outside of chassis. If PSU orange LED is turned offunder this circumstance, replace mid-plane. If LED is still lit, replace PSU.• 67 : PS3_AC_Lo_LinePower supply is connected to 110v AC.SeverityInfoServiceableAutomatically notify supportUser Action224 ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference